Rack01R3#sh ru int lo10
Building configuration...
Current configuration : 104 bytes
!
interface Loopback10
no ip address
ipv6 address 2003::3/64
ipv6 enable
ipv6 rip Cisco enable
end
Rack01R3#sh ru int e0;
Building configuration...
Current configuration : 103 bytes
!
interface Ethernet0
no ip address
ipv6 address 2001::3/64
ipv6 enable
ipv6 rip Cisco enable
end
(config)#
!
ipv6 unicast-routing
!
!
ipv6 router rip Cisco
!
-------------------------------(debug info)-------------------------------------------
*Mar; 1 00:51:33.019: RIPng: Triggered update requested
*Mar; 1 00:51:33.775: %SYS-5-CONFIG_I: Configured from console by console
Rack01R1#
*Mar; 1 00:51:34.019: RIPng: generating triggered update for Cisco
*Mar; 1 00:51:34.019: RIPng: Sending multicast update on Ethernet0 for Cisco
*Mar; 1 00:51:34.023:;;;;;src=FE80::260:5CFF:FEF4:CD0A
*Mar; 1 00:51:34.027:;;;;;dst=FF02::9 (Ethernet0)
*Mar; 1 00:51:34.027:;;;;;sport=521, dport=521, length=32
*Mar; 1 00:51:34.031:;;;;;command=2, version=1, mbz=0, #rte=1
*Mar; 1 00:51:34.031:;;;;;tag=0, metric=1, prefix=2001::/64
Rack01R1#
*Mar; 1 00:51:46.987: RIPng: response received from FE80::250:73FF:FE6C:6813 on Ethernet0 for Cisco
*Mar; 1 00:51:46.991:;;;;;src=FE80::250:73FF:FE6C:6813 (Ethernet0)
*Mar; 1 00:51:46.995:;;;;;dst=FF02::9
*Mar; 1 00:51:46.995:;;;;;sport=521, dport=521, length=52
*Mar; 1 00:51:46.999:;;;;;command=2, version=1, mbz=0, #rte=2
*Mar; 1 00:51:46.999:;;;;;tag=0, metric=1, prefix=2001::/64
*Mar; 1 00:51:47.003:;;;;;tag=0, metric=1, prefix=2003::/64
*Mar; 1 00:51:47.003: RIPng: Added neighbour FE80::250:73FF:FE6C:6813/Ethernet0
*Mar; 1 00:51:47.007: RIPng: Inserted 2001::/64, nexthop FE80::250:73FF:FE6C:6813, metric 2, tag 0
Rack01R1#
*Mar; 1 00:51:47.015: RIPng: Inserted 2003::/64, nexthop FE80::250:73FF:FE6C:6813, metric 2, tag 0
*Mar; 1 00:51:47.019: RIPng: Triggered update requested
*Mar; 1 00:51:48.019: RIPng: generating triggered update for Cisco
*Mar; 1 00:51:48.023: RIPng: Suppressed null multicast update on Ethernet0 for Cisco
Rack01R1#
*Mar; 1 00:51:53.027: RIPng: Sending multicast update on Ethernet0 for Cisco
*Mar; 1 00:51:53.031:;;;;;src=FE80::260:5CFF:FEF4:CD0A
*Mar; 1 00:51:53.031:;;;;;dst=FF02::9 (Ethernet0)
*Mar; 1 00:51:53.035:;;;;;sport=521, dport=521, length=52
*Mar; 1 00:51:53.039:;;;;;command=2, version=1, mbz=0, #rte=2
*Mar; 1 00:51:53.039:;;;;;tag=0, metric=1, prefix=2001::/64
*Mar; 1 00:51:53.043:;;;;;tag=0, metric=1, prefix=2010::/64
------------------------(ipv6 route table)--------------------------------------
Rack01R1#sh ipv6 route ri
IPv6 Routing Table - 6 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
R2003::/64 [120/2]
via FE80::250:73FF:FE6C:6813, Ethernet0
解释:
环境为R1-----R3的E0口连接,分别启用loopback10接口,在全局模式下启用ipv6 unicast-routing ，和ipv6 rip 路由进程；在接口启用ipv6 enable,并且在接口启用ipv6 rip的路由。需要注重的地方，ipv6 rip Cisco, Cisco是进程的表示。在接口下的rip路由要与进程中的表识相同，并且大小写敏感。
ipv6 ICMP debug
*Mar; 1 01:10:02.651: IPv6: SAS picked source 2010::1 for 2003::3 (Loopback10)
*Mar; 1 01:10:02.655: ICMPv6: Sending echo request to 2003::3
*Mar; 1 01:10:02.663: IPV6: source 2010::1 (local)
*Mar; 1 01:10:02.667:;;;;dest 2003::3 (Ethernet0)
*Mar; 1 01:10:02.667:;;;;traffic class 0, flow 0x0, len 100+0, prot 58, hops 64, originating
*Mar; 1 01:10:02.671: IPv6: Sending on Ethernet0
*Mar; 1 01:10:02.679: IPV6: source 2003::3 (Ethernet0)
*Mar; 1 01:10:02.683:;;;;dest 2010::1
*Mar; 1 01:10:02.683:;;;;traffic class 0, flow 0x0, len 100+14, prot 58, hops 64, forward to ulp
*Mar; 1 01:10:02.687: ICMPv6: Received ICMPv6 packet from 2003::3, type 129
*Mar; 1 01:10:02.691: ICMPv6: Received echo reply from 2003::3
*Mar; 1 01:10:02.695: IPv6: SAS picked source 2010::1 for 2003::3 (Loopback10)
*Mar; 1 01:10:02.699: ICMPv6: Sending echo request to 2003::3
*Mar; 1 01:10:02.703: IPv6: nexthop FE80::250:73FF:FE6C
Rack0:6813,
*Mar; 1 01:10:02.707: IPV6: source 2010::1 (local)
*Mar; 1 01:10:02.711:;;;;dest 2003::3 (Ethernet0)
*Mar; 1 01:10:02.711:;;;;traffic class 0, flow 0x0, len 100+0, prot 58, hops 64, originating
*Mar; 1 01:10:02.715: IPv6: Sending on Ethernet0
*Mar; 1 01:10:02.723: IPV6: source 2003::3 (Ethernet0)
*Mar; 1 01:10:02.723:;;;;dest 2010::1
*Mar; 1 01:10:02.727:;;;;traffic class 0, flow 0x0, len 100+14, prot 58, hops 64, forward to ulp
*Mar; 1 01:10:02.727: ICMPv6: Received ICMPv6 packet from 2003::3, type 129
*Mar; 1 01:10:02.731: ICMPv6: Received echo reply from 2003::3
*Mar; 1 01:10:02.739: IPv6: SAS picked source 2010::1 for 2003::3 (Loopback10)
*Mar; 1 01:10:02.743: ICMPv6: Sending echo request to 2003::3
*Mar; 1 01:10:02.747: IPv6: nexthop FE80::250:73FF:FE6C:6813,
*Mar; 1 01:10:02.747: IPV6: source 2010::1 (local)
*Mar; 1 01:10:02.751:;;;;dest 2003::3 (Ethernet0)
*Mar; 1 01:10:02.755:;;;;traffic class 0, flow 0x0, len 100+0, prot 58, hops 64, originating
*Mar; 1 01:10:02.755: IPv6: Sending on Ethernet0
*Mar; 1 01:10:02.763: IPV6: source 2003::3 (Ethernet0)
*Mar; 1 01:10:02.767:;;;;dest 2010::1
*Mar; 1 01:10:02.767:;;;;traffic class 0, flow 0x0, len 100+14, prot 58, hops 64, forward to ulp
*Mar; 1 01:10:02.771: ICMPv6: Received ICMPv6 packet from 2003::3, type 129
*Mar; 1 01:10:02.775: ICMPv6: Received echo reply from 2003::3
*Mar; 1 01:10:02.779: IPv6: SAS picked source 2010::1 for 2003::3 (Loopback10)
*Mar; 1 01:10:02.783: ICMPv6: Sending echo request to 2003::3
*Mar; 1 01:10:02.787: IPv6: nexthop FE80::250:73FF:FE6C:6813,
*Mar; 1 01:10:02.791: IPV6: source 2010::1 (local)
*Mar; 1 01:10:02.791:;;;;dest 2003::3 (Ethernet0)
*Mar; 1 01:10:02.795:;;;;traffic class 0, flow 0x0, len 100+0, prot 58, hops 64, originating
*Mar; 1 01:10:02.799: IPv6: Sending on Ethernet0
*Mar; 1 01:10:02.803: IPV6: source 2003::3 (Ethernet0)
*Mar; 1 01:10:02.807:;;;;dest 2010::1
*Mar; 1 01:10:02.807:;;;;traffic class 0, flow 0x0, len 100+14, prot 58, hops 64, forward to ulp
*Mar; 1 01:10:02.811: ICMPv6: Received ICMPv6 packet from 2003::3, type 129
*Mar; 1 01:10:02.815: ICMPv6: Received echo reply from 2003::3
*Mar; 1 01:10:02.819: IPv6: SAS picked source 2010::1 for 2003::3 (Loopback10)
*Mar; 1 01:10:02.823: ICMPv6: Sending echo request to 2003::3
*Mar; 1 01:10:02.827: IPv6: nexthop FE80::250:73FF:FE6C:6813,
*Mar; 1 01:10:02.831: IPV6: source 2010::1 (local)
*Mar; 1 01:10:02.831:;;;;dest 2003::3 (Ethernet0)
*Mar; 1 01:10:02.835:;;;;traffic class 0, flow 0x0, len 100+0, prot 58, hops 64, originating
*Mar; 1 01:10:02.839: IPv6: Sending on Ethernet0
*Mar; 1 01:10:02.843: IPV6: source 2003::3 (Ethernet0)
*Mar; 1 01:10:02.847:;;;;dest 2010::1
*Mar; 1 01:10:02.847:;;;;traffic class 0, flow 0x0, len 100+14, prot 58, hops 64, forward to ulp
*Mar; 1 01:10:02.851: ICMPv6: Received ICMPv6 packet from 2003::3, type 129
*Mar; 1 01:10:02.855: ICMPv6: Received echo reply from 2003::3
*Mar; 1 01:10:04.907: IPV6: source FE80::260:5CFF:FEF4:CD0A (local)
*Mar; 1 01:10:04.911:;;;;dest FF02::9 (Ethernet0)
*Mar; 1 01:10:04.915:;;;;traffic class 224, flow 0x0, len 92+1408, prot 17, hops 255, originating
*Mar; 1 01:10:04.915: IPv6: Sending on Ethernet0
*Mar; 1 01:10:04.919: IPV6: source FE80::260:5CFF:FEF4:CD0A (local)
*Mar; 1 01:10:04.923:;;;;dest FF02::9 (Loopback10)
*Mar; 1 01:10:04.927:;;;;traffic class 224, flow 0x0, len 112+1402, prot 17, hops 255, originating
*Mar; 1 01:10:04.931: IPv6: Sending on Loopback101R1#
Rack01R1#
*Mar; 1 01:10:07.679: IPV6: source FE80::250:73FF:FE6C:6813 (Ethernet0)
*Mar; 1 01:10:07.683:;;;;dest FE80::260:5CFF:FEF4:CD0A
*Mar; 1 01:10:07.683:;;;;traffic class 224, flow 0x0, len 72+14, prot 58, hops 255, forward to ulp
*Mar; 1 01:10:07.687: ICMPv6: Received ICMPv6 packet from FE80::250:73FF:FE6C:6813, type 135
*Mar; 1 01:10:07.691: IPV6: source FE80::260:5CFF:FEF4:CD0A (local)
*Mar; 1 01:10:07.695:;;;;dest FE80::250:73FF:FE6C:6813 (Ethernet0)
*Mar; 1 01:10:07.699:;;;;traffic class 224, flow 0x0, len 64+16, prot 58, hops 255, originating
*Mar; 1 01:10:07.703: IPv6: Sending on Ethernet0
-------------------------------
Rack01R1#sh debugging
Generic IPv6:
ICMP packet debugging is on
IPv6 unicast packet debugging is on
发现在ping的时候发出的包是以环回地址为source,在ipv4中是以出站借口地址为source.这里有点不太理解。
Rack01R3#deb ip icmp
ICMP packet debugging is on
Rack01R3#deb ip pa
IP packet debugging is on
Rack01R3#p 10.10.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
*Mar; 1 01:14:20.459: IP: tableid=0, s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), routed via RIB
*Mar; 1 01:14:20.463: IP: s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), len 100, sending
*Mar; 1 01:14:20.471: IP: s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), len 100, encapsulation failed.!!!!
SUCcess rate is 80 percent (4/5), round-trip min/avg/max = 24/27/28 ms
Rack01R3#
*Mar; 1 01:14:22.459: IP: tableid=0, s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.463: IP: s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), len 100, sending
*Mar; 1 01:14:22.475: IP: tableid=0, s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.479: IP: s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:14:22.483: ICMP: echo reply rcvd, src 10.10.10.1, dst 10.10.10.3
*Mar; 1 01:14:22.487: IP: tableid=0, s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.491: IP: s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), len 100, sending
*Mar; 1 01:14:22.503: IP: tableid=0, s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.507: IP: s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:14:22.511: ICMP: echo reply rcvd, src 10.10.10.1, dst 10.10.10.3
*Mar; 1 01:14:22.519: IP: tableid=0, s=10.10.10.3 (local)
Rack01R, d=10.10.10.1 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.523: IP: s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), len 100, sending
*Mar; 1 01:14:22.531: IP: tableid=0, s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.535: IP: s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:14:22.539: ICMP: echo reply rcvd, src 10.10.10.1, dst 10.10.10.3
*Mar; 1 01:14:22.547: IP: tableid=0, s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.551: IP: s=10.10.10.3 (local), d=10.10.10.1 (Ethernet0), len 100, sending
*Mar; 1 01:14:22.563: IP: tableid=0, s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:14:22.567: IP: s=10.10.10.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:14:22.571: ICMP: echo reply rcvd, src 10.10.10.1, dst 10.10.10.33#
---------------------ipv4的ping--------------------------
Gateway of last resort is not set
R;20.0.0.0/8 [120/1] via 10.10.10.1, 00:00:05, Ethernet0
10.0.0.0/24 is subnetted, 1 subnets
C;;;;10.10.10.0 is directly connected, Ethernet0
Rack01R3#deb ip icm
ICMP packet debugging is on
Rack01R3#deb ip pa
IP packet debugging is on
Rack01R3#p 20.20.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 20.20.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/26/28 ms
Rack01R3#
*Mar; 1 01:16:53.891: IP: tableid=0, s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.895: IP: s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), len 100, sending
*Mar; 1 01:16:53.907: IP: tableid=0, s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.911: IP: s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:16:53.915: ICMP: echo reply rcvd, src 20.20.20.1, dst 10.10.10.3
*Mar; 1 01:16:53.923: IP: tableid=0, s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.927: IP: s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), len 100, sending
*Mar; 1 01:16:53.935: IP: tableid=0, s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.939: IP: s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:16:53.947: ICMP: echo reply rcvd, src 20.20.20.1, dst 10.10.10.3
*Mar; 1 01:16:53.951: IP: tableid=0, s=10.10.10.3 (local)
Rack01, d=20.20.20.1 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.955: IP: s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), len 100, sending
*Mar; 1 01:16:53.967: IP: tableid=0, s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.971: IP: s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:16:53.975: ICMP: echo reply rcvd, src 20.20.20.1, dst 10.10.10.3
*Mar; 1 01:16:53.983: IP: tableid=0, s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.987: IP: s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), len 100, sending
*Mar; 1 01:16:53.995: IP: tableid=0, s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar; 1 01:16:53.999: IP: s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:16:54.007: ICMP: echo reply rcvd, src 20.20.20.1, dst 10.10.10.3
*Mar; 1 01:16:54.011: IP: tableid=0, s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), routed via RIB
*Mar; 1 01:16:54.015: IP: s=10.10.10.3 (local), d=20.20.20.1 (Ethernet0), len 100, sending
*Mar; 1 01:16:54.027: IP: tableid=0, s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), routed via RIB
*Mar;
1 01:16:54.031: IP: s=20.20.20.1 (Ethernet0), d=10.10.10.3 (Ethernet0), len 100, rcvd 3
*Mar; 1 01:16:54.035: ICMP: echo reply rcvd, src 20.20.20.1, dst 10.10.10.3R3#
Rack01R3#
*Mar; 1 01:16:56.211: IP: s=10.10.10.1 (Ethernet0), d=224.0.0.9, len 52, rcvd 2
