Description
　　This document describes the passWord recovery procedure for the Cisco 7000.
　　
　　Step-by-Step Procedure
　　Use the show version command to determine if the processor in your router is an RP or an RSP7000.
　　If the processor is an RP, use the password recovery procedure for the Cisco 2500.
　　If the processor is an RSP7000, use the password recovery procedure for the Cisco 1600.
　　
　　Sample Output of a show version Command on a 7000 With an RP Module
　　Router#sh vers
　　Cisco Internetwork Operating System Software
　　IOS (tm) 7000 Software (C7000-JS-M), Version 11.2(21), RELEASE SOFTWARE (fc1)
　　Copyright (c) 1986-1999 by cisco Systems, Inc.
　　Compiled Wed 15-Dec-99 23:44 by ccai
　　Image text-base: 0x00001000, data-base: 0x008F86E8
　　
　　ROM: System Bootstrap, Version 11.2(3), SOFTWARE
　　ROM: 7000 Software (C7000-AJSV-M), Version 11.2(3), RELEASE SOFTWARE (fc2)
　　
　　Router uptime is 1 hour, 38 minutes
　　System restarted by power-on at 15:19:36 MEST Tue Apr 25 2000
　　System image file is "c7000-js-mz_112-21.bin", booted via tFTP from 172.17.240.250
　　
　　cisco RP1 (68040) processor (revision C0) with 65536K bytes of memory.
　　Processor board ID 0025A50A
　　G.703/E1 software, Version 1.0.
　　SuperLAT software copyright 1990 by Meridian Technology Corp).
　　Bridging software.
　　X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
　　TN3270 Emulation software.
　　1 Switch Processor
　　1 EIP controller (6 Ethernet).
　　1 TRIP controller (4 Token Ring).
　　1 AIP controller (1 ATM).
　　6 Ethernet/IEEE 802.3 interface(s)
　　4 Token Ring/IEEE 802.5 interface(s)
　　1 ATM network interface(s)
　　128K bytes of non-volatile configuration memory.
　　4096K bytes of flash memory sized on embedded flash.
　　
　　Configuration register is 0x2102
　　
　　Sample Output of a show version Command on a 7000 With an RSP7000 Module
　　Router#sh vers
　　Cisco Internetwork Operating System Software
　　IOS (tm) RSP Software (RSP-DSV-M), Version 12.0(8.0.1)T,　MAINTENANCE
　　INTERIM SOFTWARE
　　Copyright (c) 1986-1999 by cisco Systems, Inc.
　　Compiled Sat 13-Nov-99 13:54 by ccai
　　Image text-base: 0x60010908, data-base: 0x61090000</P>
　　ROM: System Bootstrap, Version 5.3(9) [mkamson 9], RELEASE SOFTWARE (fc2)
　　BOOTFLASH: RSP Software (RSP-BOOT-M), Version 12.0(3), RELEASE SOFTWARE
　　(fc1)
　　
　　Router uptime is 5 days, 10 minutes
　　System returned to ROM by reload at 14:17:10 MEST Tue Apr 18 2000
　　System image file is "tftp://172.17.240.250/rsp-dsv-mz.120-8.0.1.T"
　　
　　cisco RSP7000 (R4700) processor with 65536K/2072K bytes of memory.
　　R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
　　Last reset from power-on
　　G.703/E1 software, Version 1.0.
　　G.703/JT2 software, Version 1.0.
　　X.25 software, Version 3.0.0.
　　Bridging software.
　　1 EIP controller (4 Ethernet).
　　1 FSIP controller (8 Serial).
　　4 Ethernet/IEEE 802.3 interface(s)
　　8 Serial network interface(s)
　　125K bytes of non-volatile configuration memory.
　　
　　16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
　　8192K bytes of Flash internal SIMM (Sector size 256K).
　　Configuration register is 0x2102