5.4(2);;;;;;;8.2(0.56)TET Ok;;

Mod
Sub-Module;;Model;;;;;;SerialHw;;;;;Statu
s;;;
--- --------------------------- ------------------ ------------ -------
-------;;
;;5 Policy Feature Card 3;;;;;;;WS-F6K-PFC3A;;;;;;;SAD0752009D;;;2.0;;;;Ok;;
;;5 MSFC3 Daughterboard;WS-SUP720;;SAD075109HX;;;2.0;;;;Ok;;
;;6 Policy Feature Card 3;;;;;;;WS-F6K-PFC3A;;;;;;;SAD0751085J;;;2.0;;;;Ok;;
;;6 MSFC3 Daughterboard;WS-SUP720;;SAD0751077C;;;2.0;;;;Ok;;
;;7 Inline Power Module;WS-F6K-PWR;;;;;;;0.0;;;;Ok;;

Mod Online Diag Status;;;
--- -------------------;;
;;2 Pass;;
;;3 Pass;;
;;5 Pass;;
;;6 Pass;;
;;7 Pass;;
3.3. 配置机器名、telnet、密码;;
在全局模式下，用conf t，进入配置模式，进行以下配置：;;
#conf t;;
#clock timezone GMT 8 ；配置时区;;
#clock set 13:30:21 31 JAN 2004 ；配置交换机时间;;
#clock calendar-valid ；使能硬件时钟同步;;
#service timestamps debug datetime localtime ；配置系统debug记录时间格式;;
#service timestamps log datetime localtime ；配置系统日志记录时间格式;;
#service passWord-encryption ；配置使用加密服务，主要针对口令加密;;
#hostname xxxx ；配置交换机名称;;
#enable secret;;0 xxxxx ；配置enable口令;;
#copy run start ；将配置信息保存到NVRAM中，重启动不会丢失;;
#line vty 0 4 ；配置telnet;;
#exec-timeout 30 0;;
#password 0;;xxxx;;
#login;;
3.4. 配置snmp;;
#conf t;;
#snmp-server community cisco ro（只读） ；配置只读通信字符串;;
#snmp-server community secret rw（读写） ；配置读写通信字符串;;
#snmp-server enable traps;;；配置网关SNMP TRAP;;
#snmp-server host 10.254.190.1 rw ；配置网关工作站地址;;

3.5. 启动三层功能;;
#ip routing ；启动路由功能;;
3.6. 查看和配置系统环境变量;;
使用show bootvar命令查看系统启动环境变量，包括BOOT, BOOTLDR, and
CONFIG_FILE参数：;;
Router# show bootvar;;
BOOT variable = slot0:c6sup22-jsv-mz.121-5c.EX.bin,1;;;
CONFIG_FILE variable does not exist;;
BOOTLDR variable = bootflash:c6msfc2-boot-mz.121-3a.E4;;
Configu