at FAR sec. 52.227-19 and subparagraph;;
(c) (1) (ii) of the Rights in Technical Data and Computer;;
Software clause at DFARS sec. 252.227-7013.;;

;;;cisco Systems, Inc.;;
;;;170 West Tasman Drive;;
;;;San Jose, California 95134-1706;;

Cisco Internetwork Operating System Software;;;
IOS (tm) s72033_rp Software (s72033_rp-PK9S-M), Version 12.2(17a)SX1, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1);;
TAC Support: http://www.cisco.com/tac;;
Copyright (c) 1986-2003 by cisco Systems, Inc.;;
Compiled Wed 29-Oct-03 08:16 by cmong;;
Image text-base: 0x40008FBC, data-base: 0x41E50000;;

This prodUCt contains cryptographic features and is subject to United;;
States and local country laws governing import, eXPort, transfer and;;
use. Delivery of Cisco cryptographic products does not imply;;
third-party authority to import, export, distribute or use encryption.;;
Importers, exporters, distributors and users are responsible for;;
compliance with U.S. and local country laws. By using this product you;;
agree to comply with applicable laws and regulations. If you are unable;;
to comply with U.S. and local laws, return this product immediately.;;

A summary of U.S. laws governing Cisco cryptographic products may be found
at:;;
http://www.cisco.com/wwl/export/crypto/tool/stqrg.Html;;

If you require further assistance please contact us by sending email to;;
export@cisco.com.;;

cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of
memory.;;
Processor board ID SAL0743NKW8;;
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache;;
Last reset from power-on;;
X.25 software, Version 3.0.0.;;
Bridging software.;;
1 Virtual Ethernet/IEEE 802.3;;interface(s);;
48 FastEthernet/IEEE 802.3 interface(s);;
36 Gigabit Ethernet/IEEE 802.3 interface(s);;
1917K bytes of non-volatile configuration memory.;;
8192K bytes of packet buffer memory.;;

65536K bytes of Flash internal SIMM (Sector size 512K).;;
Logging of %SNMP-3-AUTHFAIL is enabled;;;;
Press RETURN to get started!;;
--- System Configuration Dialog ---;;
;;;Would you like to enter the initial dialog? [yes]: no;;
回答：NO，进入手工配置，在router>下，输入enable;;
回车，进入全局模式;;
2.2. 远程telnet连接;;
当完成交换机配置，并起给交换机配置了治理地址，就可以直接采用远程telnet登
陆进入交换机了，但是必须先配置